|
Group: Awaiting Activation
Posts: 5,
Visits: 5
|
Greetings all,
I used the tech version of Macrium to clone a Windows 2012 R 2 server install on an HP ML30 Gen 9 server.
I used the portable version, and added drivers.
I verified I could boot from the USB drive.
I then removed the two original hard drives in the machine, and created a 4 disk, SSD raid 1+0 array.
Everything looked cool in the HP, all drives were nice and green, etc.
I rebooted after the successful raid array creation, booted from the Macrium USB, and then started the process to push the image to the new array.
It would not find the array in Macrium. Honestly, this is the first time I've had this issue.
Usually, you reboot, Macrium finds the array as a disk, you image, life goes on.
|