Updated to the latest BIOS version 2 days ago
32 GB eMMC drive onboard is full [ 2.3 GB free ] - cant run load windows updates. Have several apps I can't get re installs keys for.
Bought Macrium Home Edition today.
First tried to use the FREE version to clone. Clone seemed successful after watching several tutorial videos on resizing the partitions and making sure to get the 4 partitions cloned at the right sizes and sequences.
Used FREE initially to build windows recovery disk media on USB3 stick. I could run the wizard successfully on either the old or new drive to set it as the BOOT drive via - Fix Boot Problems wizard. I did it both with and the without the eMMC drive hardware enabled in BIOS.
Rebuilt the rescue media using the new purchased software version so I could get access to the ReDeploy feature.
Last two attempts .... are as follows.
Boot into BIOS
Disable eMMC Hardware
Set USB Recovery media as the first UEFI Bootable device / New 1TB drive boot sector as #2 in UEFI sequence
reboot into recovery media USB stick
Run Fix Boot Problems wizard [ it correctly identifies 1TB drive as win install on Drive D:\\ ]
Let the wizard run and rebuild boot records and re assign drive IDs
- Do NOT reboot ...
Use Redeploy - follow screen prompts [ not sure Ive done it right ] - I let it finish
Reboot into bios - make sure 1 TB drive is set in UEFi boot sequence as # 1 - verify eMMC hardware is still disabled and not showing up as active in BIOS
F10 - save and reboot ...
Nothing - just black screen